How to Clean Your Washing Machine and Get Rid of That Smell
If your clean laundry smells musty, the machine itself is probably the problem. A monthly clean takes about ten minutes of real work and keeps clothes fresh.
November 16, 2026 · 3 min read
A washing machine spends its life full of water, soap and dirt, so it is no surprise that it needs cleaning itself. If your towels come out smelling damp, there are grey marks on light clothes, or the door seal has black spots, the machine is telling you something.
The smell usually comes from a build-up of detergent, fabric softener and lint that sits in hidden parts of the machine and grows bacteria and mould. Frequent cool washes make it worse, because they never get hot enough to clear the residue. Here is how to clean every part that matters.
1. The door seal (front loaders)
The rubber seal around the door is where most of the smell lives. Pull back the folds gently and you will probably find hair, coins, lint and black mould.
- Remove anything loose with a dry cloth.
- Wipe inside the folds with a cloth dipped in warm soapy water or a little white vinegar.
- For stubborn black spots, use a product made for rubber seals and follow the label.
- Dry the seal completely with a towel.
2. The detergent drawer
Most drawers pull straight out once you press a small release tab, usually marked in the softener compartment. Soak the drawer in hot water for 10 minutes and scrub off the gummy residue with an old toothbrush. Look into the gap where the drawer sits, too. It often has mould on the roof, which you can reach with the brush.
3. The filter
Many front loaders have a small door at the bottom front with a pump filter behind it. This catches coins, hair grips, buttons and fluff. Before you open it:
Also readHow to Get Rid of Bathroom Mould for Good (and Stop It Coming Back)Unscrew the filter slowly, let the water drain, remove the debris, rinse the filter under the tap and screw it back firmly. A blocked filter can also cause slow draining and error codes, so this step alone fixes many “broken” machines.
4. The drum: run a hot maintenance wash
With the machine empty, run the hottest programme it offers, often labelled drum clean, tub clean or 90 degrees. You can use a washing machine cleaner product or a cup of washing soda in the drum. Check your manual before using vinegar regularly, as some manufacturers advise against it because it can wear rubber parts over time.
When the cycle finishes, wipe the drum and seal dry and leave the door open.
How to stop the smell coming back
- Leave the door and drawer open between washes. This is the single most effective habit. It lets the inside dry out.
- Take laundry out promptly. Wet clothes left in the drum for hours start to smell, and so does the machine.
- Use less detergent. More soap does not mean cleaner clothes. Excess leaves residue, especially in soft-water areas. Follow the dose on the pack for your water hardness and load size.
- Go easy on fabric softener. It is one of the main causes of sticky build-up.
- Run a hot wash every few weeks. If you mostly wash at 30 or 40 degrees, a regular hot towel or bedding wash helps keep the inside clean.
- Clean the seal and filter monthly. Set a reminder on your phone; it takes less time than you expect.
Top loaders
Top-loading machines have no door seal, but they still collect residue under the rim and in the agitator. Run a hot cleaning cycle, wipe under the rim and around the lid, and leave the lid open to dry.
When it is not the machine
If the smell is more like drains than damp, the cause might be the waste pipe or a trap that has dried out. A persistent sewage smell, or water that will not drain even with a clear filter, is a job for a plumber.
Look after the machine once a month and it will repay you with fresher clothes, fewer breakdowns and a longer life.
This article is general information. Check product manuals, local rules or a qualified professional (such as your vet or an electrician) before acting on it.





