How to Get Rid of Bathroom Mould for Good (and Stop It Coming Back)
Black spots on the ceiling and grey grout are a sign of one thing: moisture with nowhere to go. Here is how to clean mould safely and fix the conditions that let it grow.
November 14, 2026 · 3 min read
Mould in a bathroom is almost never about how clean you are. It is about water. Every shower puts litres of warm vapour into a small room, and if that moisture cannot leave, it settles on the coldest surfaces: the ceiling, the corners above the shower and the grout between tiles. Give mould spores a damp surface for a few days and they will happily move in.
The good news is that most bathroom mould is surface mould, and you can remove it in an afternoon. The more important job is changing the conditions, so you are not scrubbing the same corner every month.
First, check what you are dealing with
Small patches of black or grey spots on sealant, grout, tiles or painted ceilings are normal surface mould and safe to clean yourself. If the mould covers a large area (roughly more than a square metre), keeps returning through fresh paint, or the wall feels soft or smells strongly musty behind the tiles, there may be a leak or water inside the wall. That needs a plumber or a damp specialist, not a spray bottle.
People with asthma, allergies or weakened immune systems should avoid cleaning mould themselves if possible, as disturbing it releases spores.
What you need
- Rubber gloves, eye protection and a simple face mask
- A spray bottle
- White vinegar, or a mould remover from a hardware shop
- An old toothbrush or a stiff grout brush
- Microfibre cloths and a bucket of warm water
How to clean it, step by step
- Ventilate. Open the window and turn on the extractor fan before you start, and keep them running.
- Spray the area. Undiluted white vinegar works well on porous surfaces like grout. Spray until damp and leave it for about an hour. If you use a commercial mould spray, follow the label exactly.
- Scrub. Work the brush along grout lines and into corners. On a painted ceiling, wipe rather than scrub hard so you do not lift the paint.
- Rinse and dry. Wipe with clean water, then dry the surface thoroughly with a towel. Leaving it wet gives mould a head start.
- Bag the cloths. Wash cloths on a hot cycle or throw them away.
Black mould that has grown into silicone sealant usually cannot be cleaned out completely, because it lives inside the rubber. If the sealant around your bath or shower stays stained after cleaning, cut it out with a sharp blade, clean and dry the joint, and apply new anti-mould sealant. It is a cheap job and makes a bathroom look years younger.
Why it keeps coming back
Mould returns when the room stays humid. The usual causes are:
- An extractor fan that is too weak, blocked with dust or switched off too early
- Drying towels and clothes in a room without airflow
- Cold external walls where steam condenses
- Keeping the door and window shut straight after a shower
Seven habits that keep mould away
- Run the fan for longer. Keep it on during your shower and for 15 to 20 minutes afterwards. Many fans have a timer setting for exactly this.
- Clean the fan. A fan clogged with dust can lose much of its airflow. Switch it off at the mains and wipe the cover every few months.
- Squeegee the walls. Ten seconds with a squeegee on tiles and glass removes most of the water before it can evaporate into the room.
- Crack the window. Even a small gap helps moist air leave, particularly in winter.
- Hang towels to dry properly. Spread them out, or dry them in another room.
- Keep the house evenly warm. Very cold rooms encourage condensation. A steady, moderate temperature helps more than short bursts of heat.
- Use mould-resistant paint. Once the ceiling is clean and dry, a bathroom paint with an anti-mould additive makes regrowth slower.
When to call in help
If you rent and the mould is caused by a leak, a broken fan or damp coming through the walls, tell your landlord in writing and take dated photos. In many countries landlords are responsible for fixing the cause of damp. If you own the home and the problem keeps returning despite good ventilation, a damp survey can find hidden leaks or failed pointing before they become expensive.
For most bathrooms, though, the fix is simple: clean the patch, replace tired sealant, and get the steam out of the room every time you shower.
This article is general information. Check product manuals, local rules or a qualified professional (such as your vet or an electrician) before acting on it.





